Below, is a list of applicable laboratory test reports that the Pi series of products have been subjected to for compliance to the various USCG, ABYC, NMMA and ISO requirements.
| AFT EIM Ignition Protection Test |
Compliance Test Results for USCG CFR 33 Part 183 Ignition Protected Device. |
1241kb |
| AFT Environmental Test |
Compliance Test Results for USCG CFR 33 Part 183 Ignition Protected Device. |
359kb |
| Bezel 400 Hour UVB Test |
Accelerated UV B 400 hour Weathering test using method ASTM D4329 on 93Z5344 and 93Z5345 custom plastic Bezels |
425kb |
| Bezel Coating Enviromental Test |
Accelerated QUV 400 hour Weathering test using method ISO 105-A02:1993 on 91Z6127 and 91Z6128 wood grain coated custom plastic Bezels. |
115kb |
| EM Ign Protection Test |
Compliance Test Results for USCG CFR 33 Part 183 Ignition Protected Device. |
1205kb |
| EMI & RFI Compatability Test |
EMI and EMC Compliance testing for DSS system to EEC EMC Directive 89/336, CENELEC EN 50081-2, 61000-6-2, 61000-4-5 and 55011. |
2803kb |
| EMI Compatability Test |
EMC compatability test 91YY5140 keypad to CENELEC EN 50081-2, 61000-6-2, 61000-4-5 and 55011, IEC 1000-4-2 and 1000-4-3 |
1467kb |
| Keypad Salt Spray Test |
Accelerated Salt Spray Test of 91M5055 rubber keypad to ASTM B117-03 exposure for 700 hours. |
8kb |
| Keypad Temperature Test |
Temperature cycling test of 91M5055 Rubber keypad for paint wear and discoloration to ISO 105-A02 |
142kb |
| Keypad UV Exposure Test |
Accelerated UV B 400 hour Weathering test using method ASTM D4329 on 93YY5102 Keypad Assembly. |
454kb |
| Keypad Weathering & Endurance Test |
Accelerated UV B 400 hour Weathering test using method ASTM D4329 on 91M6066 rubber keypad. |
303kb |
| PowerCore 16 Microprocessor Evaluation |
Thermal evaluation of 91YY5017, 91YY5018, 91YY5085, & 91YY5085 DSS system at ambient, 50 and 70 Degrees C. |
326kb |
| PowerCore 21 Environmental Test |
Environmental tests including Salt Spray, Humidity, Mechanical Shock, Vibration and Thermal Shock on the 91XX6120, PowerCore 21 (Formerly Gen 1.8). |
475kb |
| PowerCore 21 THERMAL EVALUATION |
Test of thermal loading charteristics of 91XX6120, PowerCore 21 (Formerly Gen 1.8) at ambient and elevated temperatures. |
265kb |
| PowerCore 210 Ignition Protection |
Compliance Test Results for USCG Ignition Protected Device of the 91XX6156 PowerCore 210 (Formerly Gen 2). |
58kb |
| Silver Bezel ASTM D4329 UV Test |
Accelerated UV B 400 hour Weathering test using method ASTM D4329 on 93Z4344 & 93Z5345 bezel with silver finish. |
300kb |